Fadal VMC-4525 Vertical Machining Center
Stock Number: 2365
Fadal VMC-4525
Age: 2001
Condition: Good
Fadal 4525 VMC is a robust machine with heavy cast iron construction and high torque spindle, which reduces cycle time for heavy cutting operations including steel. Wider castings increase rigidity and coupled with the box ways, Cool Power and large 40 mm diameter ball screws, enable the 4525 to deliver tolerances of ±0.00016. High performance features of the 4525 include an automatic two-speed spindle drive system, parallel processing and optional chip wash-down and auger system. The 4525 VMC features heavy cast iron Box Ways, which provide large surface area contact for maximum vibration damping and rigidity. A leading-edge AC Vector Drive system with a high torque 22.5 HP spindle motor delivers 270 ft/lbs. of peak torque and maintains consistent torque over the full RPM range from 10-10,000 RPM with closed loop feedback. The automatic two-speed spindle drive system features a mechanical, two-speed gearless system that delivers higher performance at a wider range of RPM, which results in reduced noise, heat, vibration and power loss associated with gear boxes.
Click to view larger photo
Request a quote on stock# 2365
| Specification | Description |
|---|
| X-Axis Table Travel | 45" |
| Y-Axis Saddle Travel | 25" |
| Z-Axis Spindle Head Travel | 32" |
| Maximum Distance Spindle To Table | 4" - 32" |
| Table Size | 53.5" x 25" |
| Table Load Capacity | 4,529 lbs |
| Rapid Traverse Rate | 900 IPM(X & Y Axis) 700 IPM(Z) |
| Spindle Taper | CAT-40 |
| Spindle Speed | 10-10,000 RPM |
| Spindle Drive Motor | 30 HP |
| Automatic Tool Changer | 24 Positions |
| Automatic Tool Changer Configuration | Side Mount, Double Arm |
| Maximum Tool Diameter | 4" / 6" with adj pocket empty |
| Maximum Tool Length | 15" |
| Maximum Tool Weight | 15 lbs |
| Cutting Feed Rates X,Y,Z | 400 IPM |
| Power Requirement | 40/60 Amps, 230 Vac |
| Air Requirement | 80 psi, 15 SCFM |
| Machine Weight | 15,750 lbs |
| Machine Size | 131" x 102" x 102" |
Equipped With:
* Fadal 32MP Control w/Gibbs CAM Software
* Boxed Ways X,Y,Z
* 2 Speed Spindle Drive
* High Torque Spindle
* Graphics
* Coolant Tank & Pump
* Chip Auger
* Extended Z Axis Travel
* Rigid Tapping
* Dual Arm Side Mounted ATC
* Rear Chip Wash
* Servo Coolant
* 3/5" Floppy Disk Drive
* 422K Expanded Memory
* Hi-Speed CPU
* All Available Manuals
Hitech Machinery Sales, Inc
1900 E Tyler Rd #800
St. Charles, IL 60174
(630) 443-7865
(630) 443-9404
sales@hitechmachinery.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
