Mitsubishi FA-20PS Wire EDM


Mitsubishi FA-20PS Wire EDM

Stock Number: 0675

Mitsubishi FA-20PS

Age: 2005

Condition: As Is, Where Is


The FA Series is Mitsubishi Electric's newest wire EDM machine that supplies customers the optimum solution by incorporating the world's fastest technologies. This machine series sets new standards that thoroughly pursue the goal of "Fast, Easy, and Reliable" operation. It also showcases Mitsubishi's continuous dedication to high precision. The FA-P wire EDM machines combine high- accuracy, highspeed finishing, and automated cutting for fine detail. Advanced Friction Control (AFC) suppresses disturbances after fast feed and direction reversal, which provides high positioning and detailed accuracy. Total processing machine speed, roughing, and skimming time have been decreased with the FA-P series. A workpiece requiring a 6 microinch Ra finish now can be produced in 30 percent less time. When a 15 microinch Ra finish is required, only three cuts are needed. AE3-HS power supply helps increase carbide punch and die life by eliminating deterioration and reducing the depletion of the carbide binder. Features: * 10 Second Threading System * New-style Cut-wire Collection System * AT Device for Various Wire Types including Coated Wires * Wire Break-point Insertion and Submerged Threading * New-style Wire Tension System * AT Self-cleaning Process * VF Monitor - Real-time Cutting Speed Graphic * New-Style Work Tank Seal Plate Mechanism

                    
Click to view larger photo

Request A Quote On Our Stock Number: 0675 Mitsubishi FA-20PS Wire EDMRequest a quote on stock# 0675
SpecificationDescription
Machining Stroke ( X x Y x Z )13.8" x 19.7" x 11.8"
Machining Stroke ( U x V )+/- 1.25"
Table Size30.7" x 24.8"
Tank Dimensions42" x 32" x 12"
Maximum Workpiece Size41.3" x 31.4" x 11.6"
Maximum Workpiece Weight3,300 lbs
Taper Capacity+/-30 Degrees
Taper Angle @ Thickness15 deg @ 3.93"
Rapid Rate51 ipm
Maximum Drive Unit / Resolution0.00001mm / 2 Millionths
Wire Diameter Capability.004" - .012"
Wire Guides Included.010"
Max. Wire Spool Size22 lbs
Min Hole Diameter.02"
Dielectric Water Capacity190 gal
Electrical Requirements200V-230V VAC/60Hz/3Ph 13.5KVa
Air Requirements71-100 PSI w/2.7 cu ft/min
Approximate Machine System Dimensions101.5" L x 104.3"W x 82.7"H
Approximate Machine System Weight9,116 lbs

Equipped With:
* Mitsubishi 64 Bit High-Speed CNC Control * Submerged Machining Capability * Automatic Wire Threader (AT) * Auto Restart After Power Out * Anti-Electrolysis Power Supply (WFAP) * Auto 2nd Cut * Linear Glass Scales (XYUV) * Extra Large Direct Drive Ballscrews * Small Wire Capability Down to .004" * 4-Sided Stainless Zeroline Table * Power Master 2 - Automatic Varying Part Thickness Optimization * Fine Finish Option * Standard Remote Handcontrol * Wire Chopper * Corner Master II - Precision Corner Control * 3D Graphic Function * All Stainless Steel Machine Tank & Fluid Tank * Auto Oiler * Filtration System * Electric Chiller * All Available System Disks, Manuals, and Accessories


HomeIndexContact


Mitsubishi FA-20PS Wire EDM
Hitech Machinery Sales, Inc
720 N 17th St Unit 3
St Charles, IL 60174
(630) 443-7865
(630) 443-9404
sales@hitechmachinery.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com