Charmilles EDM Die Sinking Machines
ROBOFORM 35P
- Fast high-adaptive generator
- Drop tank design
- Linear glass scales
- Easy-to-use control
- Power Control Expert
- Micro Machining
- SPAC
- EDM Polishing
|
ROBOFORM 350S
- Interactive graphics and embedded e-documentation
- All operations - including cavity positioning - are illustrated graphically
- Manuals are replaced by documentation in electronic format (HTML)
- New Dynamic Process Control (DPControl) a Windows based control
|
ROBOFORM 350 GammaTEC
- Achieves extremely high quality surface finishes, down to CH 6/Ra 0.2µm
- Provides significant time savings through reduction or elimination of hand polishing of parts
- Maintains high geometrical respect of shapes and details
- Increases number of parts per electrode due to 30% reduction in electrode wear
- GammaTEC and standard EDM achievable on the same machine
|
ROBOFORM 350 MicroTEC
- New discharge circuitry modulates EDM power to allow a reduced electrode undersize of less than 0.002 in.
- Extremely low electrode wear allows higher machining outputs while maintaining geometry of electrodes
|
ROBOFORM 550
- Interactive graphics and embedded e-documentation
- Operations - including cavity positioning - are illustrated graphically
- Manuals are replaced by documentation in electronic format (HTML)
- New Dynamic Process Control (DPControl) - a Windows based control
|
Site
Map || Back ||
Contact Us
|
|
|
