GF AC Vertex 3

• Four sided table with universal clamping frame.
• Wire sizes down to 0.006" - 0.013". Finishes of 0.05µm (2µin) Ra.
• Agievision 5 control runs on Windows XP. Control delivers more power, less space requirement.
• IPG-V Generator has modern design and technology and delivers finer spark gap for better part geometry and surface finish. It also has low power consumption and takes up a minimum amount of space.
• Agie Jogger, a handy, manual operations hand box is standard. Use it for set up functions, axis movements, cycle start/stop and emergency stop.
• Standard Usersequence™ control feature allows the operator to define machining sequences (steps) independent of the CAM program. It allows the operator to freely choose and optimize the erosion steps between multiple parts and/or geometries.
• Standard Pieceinsert™ control feature allows the "pausing" of a job in progress in order to "insert" and machine another (emergency) workpiece, with the click of a mouse. When finished, you can automatically return to the exact point where the previous job was paused and "resume" erosion.
• Access your Agie EDM off-line through the standard Ethernet connection. This unique feature enables the user to monitor or run the Agie system from a remote location. It also provides for real time support from the local applications and service agent.

 back to AgieCharmilles EDM Wire Machines

Site Map || Home  || Contact Us